========================== Programming with PyUSB 1.0 ========================== Let me introduce myself ======================= PyUSB 1.0 is a Python_ library allowing easy USB_ access. It has the following features: 100% written in Python: Unlike the 0.x version, which is written in C, 1.0 version is written in Python. This allows Python programmers with no background in C to understand better how PyUSB works. Platform neutrality: 1.0 version implements a frontend-backend scheme. This isolates the API from system specific implementation details. The glue between the two layers is the ``IBackend`` interface. PyUSB comes with builtin backends for libusb 0.1, libusb 1.0 and OpenUSB. You can write your own backend if you desire to. Portability: PyUSB should run on any platform with Python >= 2.4, ctypes_ and at least one of the supported builtin backends. Easiness: Communicating with an USB_ device has never been so easy! USB is a complex protocol, but PyUSB has good defaults for most common configurations. Support for isochronous transfers: PyUSB supports isochronous transfers if the underline backend supports it. Although PyUSB makes USB programming less painful, it is assumed in this tutorial that you have a minimal USB protocol background. If you don't know anything about USB, I recommend you the excellent Jan Axelson's book **USB Complete**. Enough talk, let's code! ======================== Who's who --------- First of all, let's give an overview on the PyUSB modules. PyUSB modules are under the ``usb`` package. This package has the following modules: ======= =========== Content Description ------- ----------- core The main USB module. util Utility functions. control Standard control requests. legacy The 0.x compatibility layer. backend A subpackage containing the builtin backends. ======= =========== For example, to import the ``core`` module, you do as so:: >>> import usb.core >>> dev = usb.core.find() Let's get it started -------------------- Following is a simplistic program that sends the 'test' string to the first OUT endpoint found:: import usb.core import usb.util # find our device dev = usb.core.find(idVendor=0xfffe, idProduct=0x0001) # was it found? if dev is None: raise ValueError('Device not found') # set the active configuration. With no arguments, the first # configuration will be the active one dev.set_configuration() # get an endpoint instance cfg = dev.get_active_configuration() interface_number = cfg[(0,0)].bInterfaceNumber alternate_setting = usb.control.get_interface(dev, interface_number) intf = usb.util.find_descriptor( cfg, bInterfaceNumber = interface_number, bAlternateSetting = alternate_setting ) ep = usb.util.find_descriptor( intf, # match the first OUT endpoint custom_match = \ lambda e: \ usb.util.endpoint_direction(e.bEndpointAddress) == \ usb.util.ENDPOINT_OUT ) assert ep is not None # write the data ep.write('test') The first two lines import PyUSB package modules. ``usb.core`` is the main module, and ``usb.util`` contains utility functions. The next command searches our device and returns an instance object if it is found. If not, ``None`` is returned. After, we set the configuration to use. Note that no argument indicating what configuration we want was supplied. As you will see, many PyUSB functions have defaults for most common devices. In this case, the configuration set is the first one found. Then, we look for the endpoint we are interested. We search it inside the first interface we have. After finding the endpoint, we send data to it. If we know the endpoint address in advance, we could just call the ``write`` function from the device object:: dev.write(1, 'test', 0) Here we write the string 'test' at endpoint address *1* of the interface number *0*. All these functions will be detailed in the next sections. What's wrong? ------------- Every function in PyUSB raises an exception in case of an error. Besides the `Python standard exceptions `__, PyUSB defines the ``usb.core.USBError`` for USB related errors. You can also use the PyUSB log funcionality. It uses the `logging `__ module. To enable it, define the environment variable ``PYUSB_DEBUG_LEVEL`` with one of the following level names: ``critical``, ``error``, ``warning``, ``info`` or ``debug``. By default the messages are sent to `sys.stderr `__. If you want to, you can redirect log messages to a file by defining the ``PYUSB_LOG_FILENAME`` environment variable. If its value is a valid file path, messages will be written to it, otherwise it will be sent to ``sys.stderr``. Where are you? -------------- The ``find()`` function in the ``core`` module is used to find and enumerate devices connected to the system. For example, let's say that our device has a vendor id equals to 0xfffe and product id equals to 0x0001. If we would like to find it, we would do so:: import usb.core dev = usb.core.find(idVendor=0xfffe, idProduct=0x0001) if dev is None: raise ValueError('Our device is not connected') Just it, the function will return an ``usb.core.Device`` object representing our device. If the device is not found, it returns ``None``. Actually, you can use any field of the Device Descriptor_ you desire. For example, what if we would like to discover if there is an USB printer connected to the system? This is far easy:: # actually this is not the whole history, keep reading if usb.core.find(bDeviceClass=7) is None: raise ValueError('No printer found') The 7 is the code for the printer class according to the USB standard. Hey, wait, what if I want to enumerate all printers present? No problem:: # this is not the whole history yet... printers = usb.core.find(find_all=True, bDeviceClass=7) # Python 2, Python 3, to be or not to be import sys sys.stdout.write('There are ' + len(printers) + ' in the system\n.') What happened? Well, it is time for a little explanation... ``find`` has a parameter called ``find_all`` that defaults to False. When it is false [#]_, ``find`` will return the first device found that matches the specified criteria (more on it soon). If you give it a true value, ``find`` instead will return a list with all devices matching the criteria. That's it! Simple, doesn't it? Finished? No! I have not told you the whole history: many devices actually put their class information in the Interface Descriptor_ instead of the Device Descriptor_. So, to really find all printers connected to the system, we would need to transverse all configurations, and then all interfaces and check if one of the interfaces has its bInterfaceClass field equals to 7. If you are a `programmer `__ like me, you might be wondering if there is an easier way to do that. The answer is yes, it does. Firstly, let's give a look on the final code to find all printers connected:: import usb.core import usb.util import sys class find_class(object): def __init__(self, class_): self._class = class_ def __call__(self, device): # first, let's check the device if device.bDeviceClass == self._class: return True # ok, transverse all devices to find an # interface that matches our class for cfg in device: # find_descriptor: what's it? intf = usb.util.find_descriptor( cfg, bInterfaceClass=self._class ) if intf is not None: return True return False printers = usb.core.find(find_all=1, custom_match=find_all(7)) The ``custom_match`` parameter accepts any callable object that receives the device object. It must return true for a matching device, and false for a non-matching device. You can also combine ``custom_match`` with device fields if you want:: # find all printers that belongs to our vendor: printers = usb.core.find(find_all=1, custom_match=find_class(7), idVendor=0xfffe) Here we are only interested in the printers of the 0xfffe vendor. Describe yourself ----------------- Ok, we've found our device, but before talking to it, we would like to know more about it, you know, configurations, interfaces, endpoints, transfer types... If you have a device, you can access any device descriptor fields as object properties:: >>> dev.bLength >>> dev.bNumConfigurations >>> dev.bDeviceClass >>> # ... To access the configurations available in the device, you can iterate over the device:: for cfg in dev: sys.stdout.write(str(cfg.bConfigurationValue) + '\n') In the same way, you can iterate over a configuration to access the interfaces, and iterate over the interfaces to access their endpoints. Each kind of object has as attributes the fields of the respective descriptor. Let's see an example:: for cfg in dev: sys.stdout.write(str(cfg.bConfigurationValue) + '\n') for intf in cfg: sys.stdout.write('\t' + \ str(intf.bInterfaceNumber) + \ ',' + \ str(intf.bAlternateSetting) + \ '\n') for ep in intf: sys.stdout.write('\t\t' + \ str(ep.bEndpointAddress) + \ '\n') You can also use the subscript operator to access the descriptors randomly, like that:: >>> # access the second configuration >>> cfg = dev[1] >>> # access the first interface >>> intf = cfg[(0,0)] >>> # third endpoint >>> ep = intf[2] As you can see, the index is zero based. But wait! There is something weird in the way I access an interface... Yes, you are right, the subscript operator in the Configuration accepts a sequence of two items, with the first one being the index of the Interface and the second one, the alternate setting. So, to access the first interface, but its second alternate setting, we write ``cfg[(0,1)]``. Now it's time to we learn a powerfull way to find descriptors, the ``find_descriptor`` utility function. We have already seem it in the printer finding example. ``find_descriptor`` works in almost the same way as ``find``, with two exceptions: * ``find_descriptor`` receives as its first parameter the parent descriptor that you will search on. * There is no ``backend`` [#]_ parameter. For example, if we have a configuration descriptor ``cfg`` and want to find all alternate setttings of the interface 1, we do so:: import usb.util alt = usb.util.find_descriptor(cfg, find_all=True, bInterfaceNumber=1) Note that ``find_descriptor`` is in the ``usb.util`` module. It also accepts the early described ``custom_match`` parameter. Dealing with multiple identical devices *************************************** Sometimes you may have two identical devices connected to the computer. How can you differentiate them? ``Device`` objects come with two additional attributes which are not part of the USB Spec, but are very useful: ``bus`` and ``address`` attributes. First of all, it is worth to say that these attributes come from the backend and a backend is free to not support them, in which case they are set to ``None``. That said, these attributes represent the bus number and bus address of the device and, as you might already have imagined, can be used to differentiate two devices with the same ``idVendor`` and ``idProduct`` attributes. How am I supposed to work? -------------------------- USB devices after connected must be configured through a few standard requests. When I got started to study USB_ spec, I found myself confused with descriptors, configurations, interfaces, alternate settings, transfer types and all this stuff... And worst, you cannot simply ignore them, a device does not work without setting a configuration, even if it has just one! PyUSB tries to make your life as easy as possible. For example, after getting your device object, one of the first things you need to do before communicating with it is issueing a ``set_configuration`` request. The parameter for this request is the ``bConfigurationValue`` of the configuration you are interested in. Most devices has no more than one configuration, and tracking the configuration value to use is annoying (although most code I have seem simply hardcode it). Therefore, in PyUSB, you can just issue a ``set_configuration`` call with no parameters. In this case, it will set the first configuration found (if your device has just one, you don't need to worry about the configuration value at all). For example, let's imagine you have a device with one configuration descriptor with its bConfigurationValue field equals to 5 [#]_, the following ways bellow will work equally:: >>> dev.set_configuration(5) >>> dev.set_configuration() # we assume the configuration 5 is the first one >>> cfg = util.find_descriptor(dev, bConfiguration=5) >>> cfg.set() >>> dev.set_configuration(cfg) Wow! You can use a ``Configuration`` object as a parameter to ``set_configuration``! Yes, and also it has a ``set`` method to configure itself as the current configuration. The other setting you might or might not have to configure is the interface alternate setting. Each device can have only one activated configuration at a time, and each configuration may have more than one interface, and you can use all interfaces at the same time. You better understand this concept if you think of an interface as a logical device. For example, let's imagine a multifunction printer, which is at the same time a printer and a scanner. To keep things simple (or at least as simple as we can), let's consider it has just one configuration. As we have a printer and a scanner, the configuration has two interfaces, one for the printer and one for the scanner. A device with more than one interface is called a composite device. When you connect your multifunction printer to your computer, the Operating System would load two different drivers: one for each "logical" peripheral you have [#]_. And about the alternate setting? Good you have asked. An interface has one or more alternate settings. An interface with just one alternate setting is considered to not having an alternate settting [#]_. Alternate settings are for interfaces which configurations are for devices, i.e, for each interface, you can have only one alternate setting active. For example, USB spec says that a device cannot have a isochronous endpoint in its primary alternate setting [#]_, so a streaming device must have at least two alternate setttings, with the second one having the isochronous endpoint(s). But as opposed to configurations, interfaces with just one alternate setting don't need to be set [#]_. You select an interface alternate setting through the ``set_interface_altsetting`` function:: >>> dev.set_interface_altsetting(interface = 0, alternate_setting = 0) .. warning:: The USB spec says that a device is allowed to return an error in case it receives a SET_INTERFACE request for an interface that has no additional alternate settings. So, if you are not sure if the interface has more than one alternate setting or it accepts a SET_INTERFACE request, the safesty way is to call ``set_interface_altsetting`` inside an try-except block, like so:: try: dev.set_interface_altsetting(...) except USBError: pass You can also use an ``Interface`` object as parameter to the function, the ``interface`` and ``alternate_setting`` parameters are automatically inferred from ``bInterfaceNumber`` and ``bAlternateSetting`` fields. Example:: >>> intf = find_descriptor(...) >>> dev.set_interface_altsetting(intf) >>> intf.set_altsetting() # wow! Interface also has a method for it .. warning:: The ``Interface`` object must belong to the active configuration descriptor. Talk to me, honey ----------------- Now it's time to we learn how to communicate with USB devices. USB has four flavors of transfers: bulk, interrupt, isochronous and control. I don't intend to explain the purpose of each transfer and the differences among them. Therefore, I assume you know at least the basics of the USB transfers. Control transfer is the unique transfer that has structured data described in the spec, the others just send and receive raw data from USB point of view. Because of it, you have a different function to deal with control transfers, all the other transfers are managed by the same functions. You issue a control transfer through the ``ctrl_transfer`` method. It is used both for OUT and IN transfers. The transfer direction is determined from the ``bmRequestType`` parameter. The ``ctrl_transfer`` parameters are almost equal to the control request structure. Following is a example of how to do a control transfer [#]_:: >>> msg = 'test' >>> assert dev.ctrl_transfer(0x40, CTRL_LOOPBACK_WRITE, 0, 0, msg) == len(msg) >>> ret = dev.ctrl_transfer(0x40, CTRL_LOOPBACK_READ, 0, 0, len(msg)) >>> sret = ''.join([chr(x) for x in ret]) >>> assert sret == msg In this example, it is assumed that our device implements two custom control requests that act as a loopback pipe. What you write with the ``CTRL_LOOPBACK_WRITE`` message, you can read with the ``CTRL_LOOPBACK_READ`` message. The first four parameters are the ``bmRequestType``, ``bmRequest``, ``wValue`` and ``wIndex`` fields of the standard control transfer structure. The fifth parameter is either the data payload for an OUT transfer or the number of bytes to read in an IN transfer. The data payload can be any sequence type that can be used as a parameter for the array_ ``__init__`` method. If there is no data payload, the parameter should be ``None`` (or 0 in case of an IN transfer). There is one last optional parameter specifying the timeout of the operation. If you don't supply it, a default timeout will be used (more on that later). In an OUT transfer, the return value is the number of bytes really sent to the device. In an IN transfer, the return value is an array_ object with the data read. For the other transfers, you use the methods ``write`` and ``read``, respectivelly, to write and read data. You don't need to worry about the transfer type, it is automatically determined from the endpoint address. Here is our loopback example assuming the we have a loopback pipe in the endpoint 1:: >>> msg = 'test' >>> assert len(dev.write(1, msg, 0, 100)) == len(msg) >>> ret = dev.read(0x81, len(msg), 0, 100) >>> sret = ''.join([chr(x) for x in ret]) >>> assert sret == msg The first, third and fourth parameters are equal for both methods, they are the endpoint address, interface number and timeout, respectivelly. The second parameter is the data payload (write) or the number of bytes to read (read). The return of the ``read`` function is an instance of the array_ object or the number of bytes written for the ``write`` method. As in ``ctrl_transfer``, the ``timeout`` parameter is optional. When the ``timeout`` is omitted, it is used the ``Device.default_timeout`` property as the operation timeout. Control yourself ---------------- Besides the transfers functions, the module ``usb.control`` offers functions which implement the standard USB control requests and the ``usb.util`` module has the convenience function ``get_string`` specifically to return string descriptors. Additional Topics ================= Behind every great abstraction, there's a great implementation -------------------------------------------------------------- On early days, there was only libusb_. Then came libusb 1.0, and now we had libusb 0.1 and 1.0. After, they created OpenUSB_, and now we live at the `Tower of Babel `__ of the USB libraries [#]_. How does PyUSB deal with it? Well, PyUSB is a democratic library, you may choose whatever library you want. Actually, you can write your own USB library from scratch and tell PyUSB to use it. The ``find`` function has one more parameter that I haven't told you. It is the ``backend`` parameter. If you don't supply it, it will be used one of the builtin backends. A backend is a object derived from ``usb.backend.IBackend``, responsible to implement the operating system specific USB stuff. As you might guess, the builtins are libusb 0.1, libusb 1.0 and OpenUSB backends. You can create you own backend and use it. Just inherit from ``IBackend`` and implement the methods necessary. You might want to give a look at ``backend`` package documentation to learn how to do that. Don't be selfish ---------------- Python has what we say *automatic memory management*. This means that the virtual machine will take care about when to release objects from the memory. Under the hoods, PyUSB manages all low level resource management it needs to work (interface claiming, device handles, etc.) internally and most of users don't need to worry about that. But, because of the nonderterminisc nature of automatic object destruction of Python, users cannot predict when the resources allocated will be released. Some applications need to allocate and free the resources deterministically. For these kind of applications, the ``usb.util`` module has a set of functions to deal with resource management. If you want to claim and release interfaces manually, you may use the ``claim_interface`` and ``release_interface`` functions. ``claim_interface`` will claim the specified interface if the device has not done it yet. If the device already claimed the interface, it does nothing. In a similar way, ``release_interface`` will release the specified interface if it is claimed. If the interface is not claimed, it does nothing. You can use manual interface claim to solve the `configuration selection problem `__ described in the libusb_ documentation. If you want to free all resources allocated by the device object (including interfaces claimed), you can use the ``dispose_resources`` function. It releases all resources allocated and put the device object (but not the device hardware itself) in the state it was at the time when the ``find`` function returned. Oldschool rules --------------- If you wrote an application using the old PyUSB API (0.whatever), you may be asking yourself if you need to update your code to use the new API. Well, you should, but you don't need to. PyUSB 1.0 comes with the ``usb.legacy`` compatibility module. It implements the older API above the new API. "So, do I have just to replace my ``import usb`` statement with ``import usb.legacy as usb`` to get my application working?", you ask. The answer is yes, it will, but you don't have to. If you run your application untouched it will just work, because the ``import usb`` statement will import all public symbols from ``usb.legacy``. If you face a problem, probably you found a bug. Help me, please --------------- If you need help, **do not email me**, the mailing list is there for this. Subscribe instructions can be found at the PyUSB_ website. What do you think about it? --------------------------- At alpha stage, users of PyUSB are invited to give their opinion about the PyUSB API. If you think a feature is hard to use and you have a better idea, open a new thread in the mailing list so we can discuss about that. .. [#] When I say True or False (capitalized), I mean the respectivelly values of the Python language. And when I say true and false, I mean any expression in Python which evals to true or false. .. [#] See backend specific documentation. .. [#] USB spec does not impose any sequential value to the configuration value. The same is true for interface and alternate setting numbers. .. [#] Actually things are a little more complex, but this simple explanation is enough for us. .. [#] I know it sounds weird. .. [#] This is because if there is no bandwidth for isochronous transfer at the device configuration time, the device can be successfully enumerated. .. [#] This does not happen for configurations because a device is allowed to be in an unconfigured state. .. [#] In PyUSB, control transfers are only issued in the endpoint 0. It's very very very rare a device having an alternate control endpoint (I've never seem such device). .. [#] It's just a joke, don't take it serious. Many choices is better than no choice. .. _libusb: http://www.libusb.org .. _OpenUSB: http://openusb.wiki.sourceforge.net .. _USB: http://www.usb.org .. _PyUSB: http://pyusb.wiki.sourceforge.net .. _Python: http://www.python.org .. _ctypes: http://docs.python.org/library/ctypes.html .. _Descriptor: http://www.beyondlogic.org/usbnutshell/usb5.htm .. _array: http://docs.python.org/library/array.html